..:: medical-trade.net ::..

Syringe and Infusionpumps

Syringe MTN 500 I

Product introduction
MTN 500 I Syringe Pump.
Function and features.

All standard syringes of 10 ml, 20 ml, 50 ml (MTN 500I), are compatible. The machine diagnoses the syringe size automatically, and with a simple syringe specification setting, the syringe pump can guarantee an accurate and safe injection.

<< Details

Syringe MTN 500 II

Product introduction
MTN 500 II Syringe Pump.
Function and features.

Three operation modes: Rate mode, Time mode, Body Weight mode.

<< Details

MTN KL 601 Syringe Pump

Syringe size	10 ml 20 ml 30 ml 50 ml.
Volume limit	0 – 9999 ml (1 ml step).
Flow rate range	Syringe 10 ml: 0.1 – 300 ml / h, Syringe 20 ml: 0.1 – 600 ml / h. Syringe 30 ml: 0.1 – 900 ml / h, Syringe 50 ml: 0.1 – 1300 ml / h.
Purge rate	Syringe 10 ml: 300 ml / h, Syringe 20 ml: 600 ml / h. Syringe 30 ml: 900 ml / h, Syringe 50 ml: 1300 ml / h.

<< Details

Syringe Pump MTN LF JAZ F 6

Syringe Pump MTN LF JAZ F 6
model specification	MTN LF JAZ F 6
Flow rate (ml / h)	10 ml syringe: 0.1-400 20 ml syringe: 0.1 - 600. 30 ml syringe: 0.1-900 50 ml syringe: 0.1 - 1500.
Occlusion Pressure	(H) 800 + -200 mmHg. (M) 500 + -100 mmHg. (L) 300 + -100 mmHg.
Bolus rate(ml / h)	1500 (50 ml syringe). 900 (30 ml syringe). 600 (20 ml syringe). 400 (10 ml syringe).
Total volume indication (ml)	0.1- 9999.
Volumetric accuracy	≤ 2 % (drive accuracy ≤ 1 %).
Alarm	Near empty, Empty, Syringe dislocated, Syringe plunger disengaged, Malfunction, Forget to operate after power on, Occlusion, Low battery, Battery volume exhausted, AC power failure, Preset limited volume is finished
Dimension (mm)	354 (L) x 190 (W) × 128 (H).
Net weigth (Kg)	3.45.
Power supply	AC 230 V / 110 V, 50 / 60 HZ (European Union), DC 12 V. The pump can run continuous over 4 hours using internal battery. After it is charged for 16 hours at the rate of 5 ml / h.

<< Details

Infusion Pumps MTN 600 I

Product introduction
MTN 600I Infusion Pump.
Function and features.

Flow rate range from 1 - 600 ml / h ( MTN 600 I).

<< Details

Syringe MTN 600 I B

Product introduction
MTN 600IB Infusion Pump.
Function and features.

Flow rate range from 1 - 2000 ml / h (MTN 600 IB).

<< Details

Infusion Pump MTN BKMT XB

Technical Guidelines
1. Compact in design, light in weight and small in size.
2. Compatibility with a variety of IV SET.
3. Low motor driving noise.

<< Details

Infusion Pump MTN SSMS 0 2

Function and Features
3 modes: Volumetric & Drop & Time infusion.
1. Flow rate: Drop / min, ml / h and time infusion volume for choice.
2. IV set: applicable to the common infusion sets at f 3.8 mm ± 0.2 mm, d < 0.5 mm.
3. Calibration: calibrate IV set according to actual situation to ensure accuracy.

<< Details